Roller and wheel replacement.
When a sliding glass door turns heavy, the rollers underneath it have usually given up. We replace them with heavy-duty assemblies matched to your panel weight, then re-adjust the door so it glides with one hand again.
Clear quotes
Roller replacement is covered by one clear general repair quote.
Rollers, tracks, locks, and handles are all covered by one general repair fee: one flat-rate quote per door. Final flat-rate pricing is confirmed on site before approved work begins.
Free
On-site assessment
Flat-rate
Quote before work begins
One visit
Parts on every truck
2 years
Parts-and-service warranty
What we handle
Signs your rollers are worn out.
- The door takes two hands, a shoulder, or a running start to move
- It slides in jerks and catches instead of gliding evenly
- You hear scraping or grinding along the bottom of the panel
- The panel sits low, rubs the track, or looks crooked in the frame
- Adjusting the screws at the bottom of the door no longer helps
- The door jumps out of the track or leans when you slide it
What roller replacement actually involves.
Sliding glass door panels ride on small wheel assemblies tucked into the bottom of the stile. In Central Florida they take a beating from sand, salt air, and daily use, and the nylon tread eventually flat-spots or the bearing seizes so the wheel stops turning and starts skidding.
We lift the panel out of the frame, pull the old assemblies, clean debris out of the track, and install heavy-duty rollers sized to your panel. Then we re-hang the door, set the height, and check that the lock still lines up with the strike before we call it done.
Because every truck carries rollers, this is a one-visit repair. We inspect and complete the work on the same appointment instead of measuring, ordering, and returning.
How this service works
Clear steps from first call to finished door.
Step 01
Tell us the symptom
Book online or call. Describe how the door is behaving and how many doors need service.
Step 02
On-site inspection
We check the rollers, the track they run on, and the panel alignment, then confirm your flat-rate price.
Step 03
Replace and adjust
The panel comes out, new heavy-duty rollers go in, the track gets cleaned, and the door is re-set.
Step 04
Test together
We slide the door with you, confirm the lock engages, and leave you with a two-year warranty.
Questions
Answers before you book.
Other repairs under general service
See full servicesTrack Repair
Dented and grooved bottom tracks repaired or covered so new rollers glide instead of grinding.
Grinding noise, visible grooves, or the door hops off the rail
SGD Lock Replacement
The internal lock body inside the door stile replaced so the hook latch grabs the strike again.
Lock spins freely, will not latch, or the key will not turn
Handle Repair / Replacement
Loose, cracked, or stripped interior and exterior handle sets replaced and re-aligned with the lock.
Handle is wobbly, snapped, or pulls away from the door
Schedule service
Let’s get your door moving.
Book online in about a minute or call the team directly. You’ll receive a clear flat-rate price before approved work begins.