Track repair.
A grooved or dented bottom track chews through rollers and makes the door grind every time it moves. We repair the rail and cap it in stainless steel so the panel rolls on a smooth, hard surface again.
Clear quotes
Track repair is covered by one clear general repair quote.
Rollers, tracks, locks, and handles are all covered by one general repair fee: one flat-rate quote per door. Final flat-rate pricing is confirmed on site before approved work begins.
Free
On-site assessment
Flat-rate
Quote before work begins
One visit
Parts on every truck
2 years
Parts-and-service warranty
What we handle
Signs the track is the problem.
- A grinding or scraping sound follows the door as it slides
- You can see grooves, dents, or flattened metal in the bottom rail
- The door hops, catches, or comes off the track partway across
- New rollers were installed and the door still feels rough
- Dirt and grit pack into the channel and will not sweep clean
- The rail edge is bent upward or curled from a dropped panel
Repairing the rail instead of replacing the frame.
The bottom rail of a sliding glass door carries the full weight of the panel on two small wheels. Over years of daily use in Central Florida, sand and grit grind a valley into the soft aluminum, and once that valley exists the rollers drop into it and stop rolling cleanly.
We remove the panel, clear the channel, straighten what can be straightened, and fit a track cover over the existing rail. The cap gives the rollers a hard, smooth surface that resists the wear that damaged the original aluminum.
That means we do not have to cut out the frame or disturb the stucco and drywall around it. The door keeps its frame and gets a new running surface.
How this service works
Clear steps from first call to finished door.
Step 01
Tell us the symptom
Book online or call and describe the noise, the catching, and how many doors are affected.
Step 02
On-site inspection
We pull the panel, look at the rail and the rollers together, and confirm your flat-rate price.
Step 03
Repair and cap
The channel is cleared, the rail is repaired, and a stainless cap is fitted over the running surface.
Step 04
Re-hang and test
The panel goes back in, gets re-adjusted, and we slide it with you before we leave.
Questions
Answers before you book.
Other repairs under general service
See full servicesRoller / Wheel Replacement
Worn wheels and seized bearings swapped for heavy-duty rollers matched to your door weight.
Door is heavy, drags, or takes two hands to slide
SGD Lock Replacement
The internal lock body inside the door stile replaced so the hook latch grabs the strike again.
Lock spins freely, will not latch, or the key will not turn
Handle Repair / Replacement
Loose, cracked, or stripped interior and exterior handle sets replaced and re-aligned with the lock.
Handle is wobbly, snapped, or pulls away from the door
Schedule service
Let’s get your door moving.
Book online in about a minute or call the team directly. You’ll receive a clear flat-rate price before approved work begins.